Product line

Woven Vinyl Wall to Wall Flooring

Woven vinyl wall to wall flooring: the look of textile, the easy care of vinyl. Cold-welded seams; a 3.0 mm vinyl cushion backing cuts impact noise by 22 dB. It is specified for hotel corridors and guest rooms, offices, retail space and residential floors.

Specifications

Wall to Wall Flooring
PropertySpecificationTest method
Surface1.0 mm woven vinyl—
Backing3.0 mm vinyl cushion—
Total thickness4 mmISO 1765 / EN 428
Total weight2,400 gsm (average)ISO 8543 / EN 430
ConstructionWoven vinyl fibre, tightly woven for strength and fray resistance. Polyester core yarn as standard; a fibreglass core is available for broader applications.—
Design optionsSisal and linen looks, from neutral tones to bolder colourways—
Roll width200 cm (±1%)EN 426
Roll length15–25 m per rollEN 426
CE markingEN 14041:2004+AC:2006: Certificate of Conformity No. 156see Certifications
InstallationWall to wall, backing bonded and seams cold-welded—
MaintenanceVacuum or damp mop—

Specifications are taken from the official specification sheet for this product line. Rolls are a minimum of 200 cm wide; wider and exceptional widths, and custom lengths, can be considered on request.

Woven vinyl wall to wall flooring in wide teal and grey stripes, seen close up beside an upholstered bench

Where this surface works

  • Hotel corridors and guest rooms High-traffic areas where a floor has to keep its looks between refurbishments.
  • Offices and reception floors One continuous surface from the lift lobby to the meeting rooms.
  • Retail and showroom space A calm base that lets the merchandise lead.
  • Healthcare and education Wipe-clean, low-allergen floors for hospitals, clinics, classrooms and libraries.
  • Residential interiors Living areas, bedrooms, kitchens and basements that keep the look of a woven textile.

What this product line does well

  • Material and construction Vinyl-coated fibres are woven tight for strength and fray resistance.
  • Design versatility Sisal and linen looks, from neutral tones to bolder colourways.
  • Impact noise The 3.0 mm vinyl cushion backing cuts impact noise by 22 dB (ΔLw) to BS EN ISO 140-8, which helps in corridors, open offices and on upper floors.
  • Laid wall to wall, seams cold-welded Rolls are laid over the subfloor with the backing bonded to the substrate, and the joints are cold-welded through both the woven face and the PVC backing, so the seam sits flat and stays closed.

Tested performance, with the methods behind it

Values below are taken from the official specification sheet and the test reports held on file. Where a characteristic is shown on a certificate, the certificate is the reference.

Woven vinyl wall to wall flooring, tested performance
CharacteristicTest methodResult
ClassificationEN 1307:2014+A3:2018 / ISO 10974Class 23/33, domestic heavy / commercial heavy
Dimensional stabilityISO 2551Shrinkage 0.4%
Skew and bowEN 427< 1%
Slip resistanceBS EN 13893 / DIN 511300.50: Class DS / R10
Castor chair resistanceEN 985, Test Ar = 5, continuous use
Surface change (hexapod)BS ISO 103615 after 12,000 cycles
Pilling (Lisson)BS EN 1963, Test A&D4.5
Stain resistanceBS EN 423Rating 0, not affected
Water tightnessEN 151155, split water / 5, subsequent soiling
Colour fastness to lightBS EN ISO 105-B02> 6 (blue wool scale) · TÜV SÜD 70.404.18.21948.01-00
Colour fastness to rubbingBS EN ISO 105-X12Wet 4/5, dry 5 · SGS HZ1293415/TX
Light ageing (UV)ISO 4892-3, UVA-340, 1,000 hGrade 4–5
Thermal conductivityISO 83010.072 W/m·K, thermal resistance 0.046 m²·K/W
Reaction to fireEN ISO 9239-1 / EN ISO 11925-2Pass, classification Cfl-s1, d0
Antistatic behaviourISO 6356See Certifications for the measured value
Sound insulationBS EN ISO 140-8ΔLw 22 dB
Sound absorptionEN ISO 354αw 0.05, not classified
Fungus resistanceASTM G21-13Grade 0
Electrical propensityISO 10965:2011Horizontal 6.8 × 1010, vertical 1.6 × 109
Pentachlorophenol (PCP)CEN/TS 14494Not detected
Formaldehyde emissionEN 717-2E1: 0.122 mg/m³·h
Colour fastness (change in colour / staining)BS EN ISO 105-E01:2013Change in colour 4/5, staining 4/5
Phthalates (DEHP, DBP, BBP, DIBP)REACH Annex XVII, entries 51 & 52, (EU) 2018/2005Pass
REACHREACH Regulation, 211 substancesPass
RoHSEU RoHS Directive 2015/863Pass
AZOISO 14362-1:2017Pass
GB 8624GB 8624-2012B1 (C-s1) transparent / B1 (B-s1) opacity

Indicative values from production testing; the certificate or test report prevails.

What matters on site

  • Trim the selvage Trim 2–3 cm in from the edge before installation.
  • Never mix batches texlyweave® is a woven fabric, so tonality can vary slightly from one production batch to the next. Each roll label carries its batch number, finish one batch before starting the next, and use the same batch within one space.
  • Laying Installed as broadloom with the backing bonded to the substrate and the seams cold-welded, so the floor reads as one surface with no raised trip edges.
  • Use an experienced fitter Woven vinyl needs a professional installer. We can advise on subfloor preparation and laying sequence.
  • Water resistant, not waterproof Standing water can work through to the subfloor, wipe spills up promptly.

Everyday maintenance

  • Routine Vacuum as normal; damp mop with a neutral cleaner. No waxing, no polishing.
  • Spills Blot, don’t rub. Most spills lift cleanly, stain resistance is rated 0 (not affected) to BS EN 423.
  • Common spots Adhesive tape: harden with ice, rub off. Alcoholic drinks: cold water, then white vinegar, then rinse. Butter or grease: hot water. Chewing gum: ice, then cold water. Blood or ketchup: cold water, diluted ammonia, then rinse thoroughly.
  • Avoid Abrasive pads, aggressive solvents and steam. Chair castors are rated for continuous use, but protective mats are sensible under heavy castor traffic.

Custom and special orders

  • Custom designs Unique designs can be developed for your project. Minimum order 1,000 m².
  • Special widths and lengths Available on request; the pallet system is affected, so please plan with us early.
  • Two core systems Polyester core as standard, fibreglass core for broader application and longer-term development needs.
  • Cut-and-bound rugs and mats The same woven vinyl is available as rugs, mats and runners if you want one material across a whole project.
  • Sample swatches A4 swatches are available to qualified distributors and specifiers; samples are free of charge, with the courier at your cost (freight collect).

Wall to wall flooring: questions we get asked

Is texlyweave® flooring waterproof?

It is water resistant, not waterproof. It will not absorb moisture, but standing water left for a long period can work through to the subfloor, so please wipe it up promptly.

Is it soft to walk on?

Yes. The 3.0 mm vinyl cushion backing makes it soft underfoot and quiet compared with a hard PVC-backed floor covering, while the woven surface takes heavy traffic.

Can it be used with office chairs on castors?

Yes. Castor chair resistance is rated r = 5 for continuous use (EN 985, Test A). Under very heavy castor traffic we still recommend protective chair mats.

Can it be laid over underfloor heating?

We have practical experience rather than a laboratory result for this. Woven vinyl comfortably withstands around 40°C, so a heating system running at that temperature is not a problem.

Can a damaged area be repaired?

Yes. A patch of the same pattern is laid over the damaged area, both layers are cut through together, and the new piece is bonded in, so the repair is invisible and no whole roll is wasted.

What does the batch number on the roll label mean?

It identifies the production batch. Only use rolls with the same batch number within one space, and finish one batch before starting the next.

How do I get samples?

Write to info@dragonshine.net or use the contact form. Swatches are available to qualified distributors and specifiers; samples are free of charge, with the courier at your cost (freight collect).

Collections available in this product line

GRANITO · GRAINY · RANDOM · HERRINGBONE

Browse all 18 collections